Induction Fuel System Cleaner

Induction Fuel System Cleaner

Use Only With Induction Fuel System Cleaner Application Tool

Provides an simple, effective and complete intake system cleaning

  • Safe for use in all gasoline and diesel engines, including GDI, MPFI and Hybrid
  • Removes Carbon Deposits
  • Restores Power and Performance
  • Cleans Intake Valve Seats and Compression Chamber
  • Oxygen Sensor, EGR Valve and Catalytic Converter Safe
  • Safe For intake Coated Surfaces

RED LINE® INDUCTION FUEL SYSTEM CLEANER To be used with the Induction Fuel System Cleaner Application Tool.

Parts:

  • PT #: 17028

    RLO #: 1085917

    UNIT: 11 oz.

    CASE SIZE: 12/cs

    PALLET UNITS: 1500

This product is only available for professional maintenance/service locations.

Are you Retailer or Automotive professional?

Warning

WARNING: This product can expose you to chemicals including Benzene (CASRN 71-43-2) which is known to the state of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Product Data Sheet

Induction Fuel System Cleaner Data Sheet

Safety Data Sheet

Induction Fuel System Cleaner Safety Data Sheet

Product Sales Sheet

Induction Fuel System Cleaner Sales Sheet

Directions

  1. Locate a positive vacuum source (PCV Valve or Power Brake Vacuum Line is recommended).
  2. Pour contents of this bottle into canister of Applicator Tool.
  3. Connect vacuum hose to tapered connector on Applicator Tool. Applicator Tool valve must be turned OFF (clockwise position) before using this product.
  4. Start engine and run at idle (approximately 1000-1500 RPM).
  5. Carefully open valve on Tool and slowly add intake solution to engine. Adjust valve to ensure engine continues to idle and does not stall. Continual adjustment of valve may be required to maintain idle speed and prevent stalling. Do not run engine over 2000 RPM.
  6. Engine may shake and/or stall during this procedure. DO NOT RESTART VEHICLE IF ENGINE STALLS. Remove spark plugs. Crank engine 10 seconds without plugs. Reinstall spark plugs.
  7. When Applicator Tool canister is empty, remove line from connector and reconnect it to PCV Valve or Power Brake Vacuum line.

RED LINE IS NOT RESPONSIBLE, OR LIABLE, FOR ENGINE DAMAGE CAUSED BY FAILURE TO CAREFULLY FOLLOW DIRECTIONS. DO NOT USE THIS PRODUCT WITH DIESEL OR ROTARY (Mazda) ENGINES, OR BMW (ZF4HP22) TRANSMISSIONS.

Hazards

DANGER: EXTREMELY FLAMMABLE LIQUID AND VAPOR. MAY BE FATAL IF SWALLOWED AND ENTERS AIRWAYS. CAUSES SKIN IRRITATION. CAUSES SERIOUS EYE IRRITATION. MAY CAUSE DROWSINESS. MAY CAUSE DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE. SUSPECTED OF CAUSING CANCER. SUSPECTED OF DAMAGING THE UNBORN CHILD.

Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Keep away from heat/sparks/open flames/hot surfaces. No smoking. Keep container tightly closed. Ground/bond container and receiving equipment. Use explosion-proof electrical (ventilation and lighting) equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Do not breathe dust/fumes/gas/mist/vapors/spray. Avoid contact during pregnancy/while nursing. Wash skin thoroughly after handling. Use only outdoors or in well-ventilated area. Wear protective gloves/protective clothing and eye/face protection. IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician if you feel unwell. Do NOT induce vomiting. IF ON SKIN (or hair): Remove/take off immediately all contaminated clothing. Rinse skin with water/shower. If skin irritation occurs: Get medical advice/attention. IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor/physician if you feel unwell. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persist: Get medical advice/attention. IF exposed or concerned: Get medical advice/attention. Take off contaminated clothing and wash before reuse. In case of fire: Use C02, dry chemical, or foam for extinction. Store in well-ventilated place. Keep cool. Store locked up. Dispose of contents/container to an approved waste disposal plant.

v